IMI 629A32 Accelerometer, Industrial, ICP FREE SHIPPING

IMI 629A32 Accelerometer, Industrial, ICP FREE SHIPPING  ENGLISHSI Performance    Sensitivity (±5 %)500 mV/g51 mV/(m/s²)[1]     Measurement Range±10 g±98 m/s²     Frequency Range (±5 %)144 to 120000 cpm2.4 to 2000 Hz[4]     Frequency Range (±10 %)102 to 300000 cpm1.7 to 5000 Hz     Frequency Range (±3 dB)48 to 480000 cpm0.8 to 8000 Hz     Resonant Frequency1200 kcpm20 kHz[2]     Broadband Resolution (1 to 10000 Hz)120 µg1177 µm/sec2[2]     Non-Linearity±1 %±1 %[3]     Transverse Sensitivity≤5 %≤5 % Environmental    Overload Limit (Shock)5000 g pk49050 m/s² pk     Temperature Range-65 to +250 °F-54 to +94 °C     Temperature ResponseSee GraphSee Graph[2] Electrical    Settling Time (within 1% of bias)≤2.0 sec≤2.0 sec     Discharge Time Constant≥0.2 sec≥0.2 sec     Excitation Voltage18 to 28 VDC18 to 28 VDC     Constant Current Excitation2 to 20 mA2 to 20 mA     Output Impedance<100 Ohm<100 Ohm     Output Bias Voltage8 to 12 VDC8 to 12 VDC     Spectral Noise (10 Hz)6.0 µg/√Hz58.9 (µm/sec2)/√Hz[5][2]     Spectral Noise (100 Hz)2.2 µg/√Hz21.6 (µm/sec2)/√Hz[2]     Spectral Noise (1 kHz)1.2 µg/√Hz11.8 (µm/sec2)/√Hz[2]     Electrical ProtectionRFI/ESDRFI/ESD     Electrical Isolation (Case)>100000000 Ohm>100000000 Ohm Physical    Size - Length1.5 in38.1 mm     Size - Width1.5 in38.1 mm     Size - Height0.82 in20.8 mm     Weight4.9 oz139 gm     Mounting Thread1/4-28 Male1/4-28 Male[6]     Mounting Torque2 to 5 ft-lb2.7 to 6.8 Nm     Sensing ElementCeramicCeramic     Sensing GeometryShearShear     Housing MaterialStainless SteelStainless Steel     SealingWelded HermeticWelded Hermetic     Electrical Connector4-Pin MIL-C-264824-Pin MIL-C-26482     Electrical Connection PositionSideSide     Electrical Connections (Pin A)X axisX axis     Electrical Connections (Pin B)Y axisY axis     Electrical Connections (Pin C)Z axisZ axis     Electrical Connections (Pin D)GroundGround [1] Conversion Factor 1g = 9.81 m/s².[2] Typical.[3] Zero-based, least-squares, straight line method.[4] The high frequency tolerance is accurate within ±10% of the specified frequency.[5] Typical value.[6] 1/4-28 has no equivalent in S.I. units.[7] See PCB Declaration of Conformance PS023 for details.Accessories:Supplied081A56Captive mounting bolt 1/4-28 x .75"(1)ICS-1NIST-traceable single-axis amplitude response calibration from 600 cpm (10 Hz) to upper 5% frequency(1)warehouse 3 drawer 1